Jiangsu Faygo Union Machinery Co., Ltd.
Making good machine,being good person!
Add to Cart
Plastic Bottle Injection Blow Molding Machine , PP / PET Bottle Making Machine
Injection Blow molding machine Characteristics :
1. It is one step injection blowing machine, the raw material is PP/PE/PS pellets, no need preforms.
2. One Mold with Multi-caivity based on your required bottle size, using three horizontal station rotary device, hot runner system and multi-stage injection molding system,injection molding, blow molding, demolding three position and action to ensure equipment of high efficiency and energy saving operation.
3. Compared with the blow molding machine, the quality of the bottle neck made by thus machine is better, and it no need waste raw material.
Technical parameters
|
Name | Unit | FG40 | FG60 | FG80 | FG100 |
| Screw diameter | mm | 40 | 45 | 50/55 | 60 |
| L/D Ratio | 22:1 | 22:1 | 22:1 | 22:1 | |
| Injection Capacity | 9 | 176 | 260 | 314 | 415 |
| Heating power | KW | 7.5 | 10 | 10.8 | 12 |
| Heating section | 3+N | 3+N | 4+N | 4+N | |
| Injection mould clamping force | KN | 400 | 600 | 800 | 1000 |
| The injection mold opening stroke | mm | 140 | 140 | 140 | 150 |
| Mould clamping force | KN | 60 | 100 | 120 | 150 |
| Blow mold opening stroke | mm | 140 | 140 | 140 | 150 |
| Injection stroke | mm | 160 | 160 | 160 | 160 |
| Mold Size | mm | 480*340 | 600*390 | 800*400 | 1000*460 |
| Min. Thickness of Mold | mm | 180 | 240 | 280 | 280 |
| Main motor power | KW | 11 | 18.5 | 22 | 30 |
| Reject Stroke | mm | 210 | 230 | 230 | 230 |
| Dry Cycle Time | s | 3.5 | 4 | 4 | 4 |
| Total power | KW | 20 | 30 | 40 | 45 |
| Operating power | % | 52-70 | 52-70 | 52-70 | 52-70 |
| System pressure | Map | 14 | 14 | 14 | 14 |
| Compressed air pressure | MPa | 0.7-1.2 | 0.7-1.2 | 0.7-1.2 | 0.7-1.2 |
| Cooling water pressure | MPa | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 |
| Product maximum diameter | mm | 120 | 120 | 120 | 120 |
| Product maximum length | mm | 200 | 220 | 220 | 220 |
| Product volume | ml | 3-800 | 3-800 | 3-1000 | 3-1000 |
| Dimensions | M | 3*1.3*1.7 | 3.5*1.4*1.8 | 4*1.6*2 | 4.5*1.8*2 |
| Equipment weight | Ton | 3.5 | 5 | 8 | 10 |
Mode cavity number control table
| Product Size | ZQ40 | ZQ60 | ZQ80 | ZQ100 | |||
| Volume | Neck Dia. | Height | Body Dia. | Cavities | Cavities | Cavities | Cavities |
| 5ML | 10 | 35 | 45 | 9 | 14 | 18 | 22 |
| 10ML | 12 | 40 | 20 | 9 | 12 | 16 | 20 |
| 20ML | 15 | 50 | 25 | 8 | 10 | 14 | 18 |
| 30ML | 20 | 60 | 30 | 7 | 9 | 13 | 16 |
| 40ML | 22 | 65 | 35 | 7 | 8 | 12 | 15 |
| 60ML | 28 | 75 | 40 | 6 | 8 | 12 | 14 |
| 80ML | 30 | 80 | 45 | 5 | 7 | 10 | 13 |
| 100ML | 32 | 85 | 50 | 4 | 6-7 | 10 | 12 |
| 150ML | 35 | 90 | 53 | 3 | 5-6 | 8 | 9 |
| 200ML | 38 | 100 | 58 | 3 | 4-5 | 7 | 8 |
| 400ML | 42 | 120 | 65 | 2 | 3-4 | 6 | 7 |
| 650ML | 50 | 160 | 80 | 1 | 2 | 5 | 6 |
| 800ML | 40 | 200 | 90 | 1 | 2 | 4 | 5 |
| 100ML | 45 | 200 | 90 | 1 | 2 | 3 | |
